Skip Navigation

WinDAM B Software

Estimating Erosion of Earthen Embankments and Auxiliary Spillways of Dams

short url for this page:
WinDAMB 1.1 logo photo of water over spillway

Q:  What is the purpose of WinDAM B software?

A:    WinDAM B  models erosion in earthen embankments as well as erosion in earthen auxiliary spillways of dams. The three-phase erosion model was jointly developed by the Agricultural Research Service (ARS) and the NRCS.

1)    Phase one of the erosion or failure process is failure of the vegetal cover and development of concentrated flow.

2)    Phase two is downward erosion in the area of concentrated flow, resulting in headcut formation.

3)    Phase three is downward and upstream movement of the headcut, potentially breaching the spillway or embankment.

Each phase is described by a set of threshold-rate relationships based on the process mechanics. A headcut erodibility index (Kh) describes the resistance of the exposed geologic materials to erosive attack during the third phase of the process.

Return to top of page


Q:  Where can I download WinDAM B software?


              A. click here: download button   for (6.9mb)


Return to top of page



Q:  Where can I download WinDAM B manuals?


             A. click here: download button    for WinDAMB_QuickStartGuide200908.pdf (1.7mb)
            or click here: download button    for (9.9mb)


Return to top of page


Q:  How do I start using WinDAM B?

A:    Here are steps to start using and viewing WinDAM B example files:

1)    Download and install the WinDAM B software

2)    Run WinDAMB.exe.
Picture of earth dam and reservoir appears.
Screen title is: WinDAM B

3)    Create a new project file for the examples.
(File-->New Project--> browse and type in a new project name)

4)    Import all the *.wdc input files into the newly-created WinDAM B project.
(File-->Import File-->  browse and select *.wdc example input files)

5)    Run all the files.
(Run-->Simulate All Files)  

6)    View the output summary
(View-->Summary Table)

7)    To view graphs or additional text output:
Left-click a filename in summary table.
Column becomes highlighted in blue.
Click bottom-row buttons to View Graphs/View Text/View Aux Spillway #.

Return to top of page


Q: Where can I download some example data sets?
        A:  Twelve sample data sets, combined in one download file, demonstrate some of the WinDAM B features.
                    They are described in the table below the download button.


                click here: download button    for (166kb)
WinDAM B Example Filename Example File Description
   01-PSwDD.WDC  Principal spillway routing with drawdown
   02-SDHstability.WDC  Earth spillway stability or integrity design
   03-Overtop.WDC  Embankment overtopped, but not breached, Maintenance Code 1
   04-HansonOvertop.WDC  Embankment overtopped, but not breached, Hanson/Robinson. stress model, Maintenance Code 1
   05-HROvertopBreach.WDC  Embankment overtops & breaches, Hanson/Robinson stress model, Maintenance Code 3
   06-THOvertopBreach.WDC  Embankment overtops & breaches, Temple/Hanson energy model, Maintenance Code 3
   07-FBIntegrity.WDC  Integrity Design, Maintenance Code 2
   08-FBIntegritywBarrier.WDC  Integrity Design, Maintenance Code 2
   09-FBIntegrityNoBarrierSand.WDC  Integrity design, no barrier, sandy auxiliary spillway (RTside) breaches. Auxiliary spillway BREACH halts auxiliary spillway erosion computations, however, hydraulic computations continue.
   10-FBIntegrity2AuxSpwy.WDC  Stability/integrity design, two auxiliary spillways
11-FBIntegrity2AuxSpwyTailwater.WDC  Stability/integrity design, two auxiliary spillways, tailwater added
   12-FBIntegrity2AS1Structural.WDC  Two auxiliary spillways, one auxiliary spillways is a structural spillway

Return to top of page

Q:  What hydrology methods are included in WinDAM B?

A:    WinDAM B does not create a reservoir inflow hydrographs.  The reservoir inflow hydrograph must be created outside of WinDAM B and imported or pasted into the input screen.  Software from NRCS such as SITES or WinTR-20 can create the needed hydrograph.  Software from other agencies or vendors such as Corps of Engineers HEC-HMS can also be used to create the reservoir inflow hydrograph.

WinDAM B hydraulically routes a single inflow hydrograph through the dam’s riser/conduit, auxiliary spillway, and over the embankment to create an outflow hydrograph.

Return to top of page


Q:  How is WinDAM B different from SITES software?


A:    WinDAM B software does not check the design for compliance with NRCS design criteria.  The user must check the design.  WinDAM B estimates the erosion in an earthen auxiliary spillway as well as the erosion from overtopping the earthen embankment.  WinDAM B does not create a reservoir inflow hydrograph, it only imports an existing hydrograph. SITES software checks the site design against existing USDA-NRCS design criteria found in USDA-NRCS National Engineering Handbook Part 630 – Hydrology, Technical Release 60, and National Conservation Practice Standard 378 – Pond.  SITES software estimates erosion in an earthen auxiliary spillway, but does not analyze embankment overtopping.  SITES can create a hydrograph from basic hydrologic information such as: rainfall depth, rainfall distribution, rainfall duration, drainage area, and runoff curve number.


Return to top of page


Q:  Will WinDAM B replace SITES?


A:    No, WinDAM B will not replace SITES.  New features will continue to be added to the WinDAM series.  SITES will be maintained (though not enhanced) as a design tool for NRCS engineers and others who want to use it.

Return to top of page


Q:  Who created WinDAM B software?


A:    WinDAM B was developed cooperatively by US Department of Agriculture-Agricultural Research Service, USDA-Natural Resources Conservation Service, and Kansas State University.

Return to top of page


Q:  What kind of geotechnical information do I need for a WinDAM B analysis?


A:    For a complete erosion estimate including the auxiliary spillway and earthen embankment, the geotechnical composition of these two features of the dam must be characterized.  Typical parameters such as representative particle size, percent clay fraction, plasticity index, total unit weight, undrained shear strength, and critical shear stress.  Specific to WinDAM B software, the headcut erodibility index (Kh) and detachment coefficient (Kd) also need to be estimated. 

Return to top of page


Q:  What fees or licensing is required to use WinDAM B software?


A:    None.  The Natural Resources Conservation Service, the Agricultural Research Service, and Kansas State University used government funds to develop the WinDAM B software. It may be downloaded for use and copying at no additional expense or license requirements.

Return to top of page

Q:  Who can I contact for additional information about WinDAM B software?

A: These NRCS employees can help answer your questions:

    Tom Brown, Geotechnical Engineer     817/509-3772
    Jon Fripp, Stream Mechanics Engineer     817/509-3771
    Craig Savela, Geologist     817/509-3761
    Karl Visser, Hydraulic Engineer     817/509-3763

Return to top of page


Q:  What is the current version WinDAM B?


A:    Version 1.1 was released August 2012.

Return to top of page


Q:  My dam doesn’t have grass growing on it.  Can I still use WinDAM B software?


A:    WinDAM B can estimate erosion if the dam slope is protected by vegetation, riprap, or is simply bare earth.  WinDAM B does not handle other erosion protection measures such as articulated concrete blocks (ACB’s) or erosion matting products.

Return to top of page


Q:  I want to analyze internal erosion (piping) of my dam.  Can I use WinDAM B software?


A:    No.  WinDAM B doesn’t have the capability to analyze internal erosion, only overtopping erosion.  However, future versions of WinDAM software will add the internal erosion capability.

Return to top of page

Q:  WinDAM B software analyzes dam overtopping flows.  Does NRCS policy allow overtopping?

A:    WinDAM B earthen embankment overtopping software and manuals do not contain NRCS policy regarding NRCS design for dams and ponds. However, policy regarding NRCS dam design and dam safety is contained in the following documents:

WinDAM B software is a useful tool for prioritizing dam rehabilitation projects for existing dams. WinDAM B software can also be used to design dams to comply with NRCS policy.

Return to top of page