Skip

CAD Resources

 

Civil 3D 2012 CAD Training Tutorials

Topic Description Revision Date
Dam - Grading Creating a dam embankment and the auxiliary spillway grading. September 2013

 

Civil 3D 2012 CAD Drawing Templates

Topic Description Revision Date
Grassed Waterway Drawing Template for a Grassed Waterway. September 2013

 

South Dakota Civil 3D Training Sessions Held in 2013

Topic Description Training Date
Session 1 - Introduction to Autocad Civil 3D Basic of Autocad Civil 3D July 2013
  Session 1 Agenda and Participants.pdf  
  Introduction to Autocad and Civil 3D  
  Class 1 example.pdf  
  Points file for Class 1 examples.csv  
Session 2 - Corridors Corridor Training (Grassed Waterways) August 2013
  Session 2 Agenda and Participants.pdf  
Session 3 - Grading Grading Training (Dams) August/September 2013
  Session 3 Agenda and Participants.pdf  

 

 

 

 

Civil 3D 2010 CAD Training Tutorials

Topic Description Revision Date
Dam - Points and Surfaces Creating a ground surface from a GPS topographic survey.

Points file to use with the Dam tutorial.

May 2012
Dam - Grading Creating a dam embankment and the auxiliary spillway using Grading. (see revised tutorial for Civil 3D 2012) May 2012
Dam - Stage-Storage The storage volume of the pool area upstream of a dam is evaluated and a report is created with the elevation , area, and volume of storage. May 2012
Dam - Profiles The profile along the centerline of the dam and the profile of the pipe are created. May 2012
Dam - Pipe Network A pipe network is created to draw and display a principal spillway pipe. May 2012
Dam - Drafting In this example, updating text fields, working with viewports and annotating objects are discussed. May 2012
Dam - Exporting an Alignment An alignment is exported from AutoCAD Civil 3D to a Trimble TSC2 survey controller with Trimble Access software with the Roads module installed. May 2012
Grassed Waterway The discusses the design of a waterway using a Corridor within AutoCAD Civil 3D 2010.

Points file to use with the grassed waterway tutorial.

Civil 3D file to use with the grassed waterway tutorial.

May 2012
Animal Waste Management System This drafting note will proceed through the steps of developing a set of plans for an agricultural waste management system.

Points file to use with the Animal Waste Management System tutorial.

Civil 3D file to use with the Animal Waste Management System tutorial.

May 2012
Feature Code Library This is the process to add a feature code library to the data collector.
The feature code library file is located here (FAL;7 KB).
May 2012

Civil 3D 2010 CAD Drawing Templates

Topic Description Revision Date
Animal Waste Management System Drawing Template for Animal Waste Management System. May 2012
Grassed Waterway Drawing Template for a Grassed Waterway. (See revised tutorial for Civil 3D 2012) May 2012
Dam-Pipe Drawing Template for a Dam with a principal spillway pipe. May 2012
Dam-No-Pipe Drawing Template for a Dam without a principal spillway pipe. May 2012
General Template General Drawing Template. May 2012

Additional training and resources can be found at: