Skip Navigation

CAD Resources

 

Exporting Civil 3D to HEC-RAS

Topic Description Revision Date
HEC RAS Design Note 1 ver. 1.1 Exporting a Civil 3D surface to HEC-RAS July 2015
Civil 3D HEC-RAS fix Flipping Coordinates, Method 1 September 2014
RAS Flipper, Ver. 1.0 Create an export file for HecRAS July 2015
HEC-RAS data from Civil 3D    

 

Miscellaneous Files

Topic Description Revision Date
LiDar DEM Creating a Surface in Civil 3D from a DEM May 2015
C3D importing a Photo Importing a photo into Civil 3D April 2016
C3D Map Export Map export from Civil 3D April 2016

 

South Dakota Civil 3D Training Sessions Held in 2013

Topic Description Training Date
Session 1 - Introduction to Autocad Civil 3D Basic of Autocad Civil 3D July 2013
  Session 1 Agenda and Participants.pdf  
  Introduction to Autocad and Civil 3D  
  Class 1 example.pdf  
  Points file for Class 1 examples.csv  
Session 2 - Corridors Corridor Training (Grassed Waterways) August 2013
  Session 2 Agenda and Participants.pdf  
Session 3 - Grading Grading Training (Dams) August/September 2013
  Session 3 Agenda and Participants.pdf  

Civil 3D 2014 CAD Training Tutorials

Topic Description Revision Date
Dam - Points and Surfaces Creating a ground surface from a GPS topographic survey.

Points file to use with the Dam tutorial.

April 2016
Dam - Grading Creating a dam embankment and the auxiliary spillway using Grading. (see revised tutorial for Civil 3D 2012) April 2016
Dam - Stage-Storage The storage volume of the pool area upstream of a dam is evaluated and a report is created with the elevation , area, and volume of storage. April 2016
Dam - Profiles The profile along the centerline of the dam and the profile of the pipe are created. April 2016
Dam - Pipe Network A pipe network is created to draw and display a principal spillway pipe. April 2016
Dam - Drafting In this example, updating text fields, working with viewports and annotating objects are discussed. April 2016
Dam - Exporting an Alignment An alignment is exported from AutoCAD Civil 3D to a Trimble TSC2 survey controller with Trimble Access software with the Roads module installed. April 2016
Grassed Waterway The discusses the design of a waterway using a Corridor within AutoCAD Civil 3D 2010.

Points file to use with the grassed waterway tutorial.

Civil 3D file to use with the grassed waterway tutorial.

April 2016
Animal Waste Management System This drafting note will proceed through the steps of developing a set of plans for an agricultural waste management system.

Points file to use with the Animal Waste Management System tutorial.

Civil 3D file to use with the Animal Waste Management System tutorial.

April 2016
Feature Code Library This is the process to add a feature code library to the data collector.
The feature code library file is located here (FAL;7 KB).
May 2012

Civil 3D 2014 CAD Drawing Templates

Topic Description Revision Date
Animal Waste Management System Drawing Template for Animal Waste Management System. April 2016
Grassed Waterway Drawing Template for a Grassed Waterway. (See revised tutorial for Civil 3D 2012) April 2016
Dam-Pipe Drawing Template for a Dam with a principal spillway pipe. April 2016
Dam-No-Pipe Drawing Template for a Dam without a principal spillway pipe. April 2016
General Template General Drawing Template. April 2016

Additional training and resources can be found at: