Skip

Hydrology Training Series Module 206B Peak Discharge (Graphical Method, TR-55) (

Overview

This module presents the peak discharge equation, input requirements, peak discharge computations, and limitations

Objectives

Upon completion of this module, participants will be able to compute peak discharge using TR-55, Chapter 4, Graphical Peak Discharge Method

Prerequisites

Modules 101 - Introduction to Hydrology; 102 - Precipitation; 103 - Runoff Concepts; 104 –

Runoff Curve Number Computations, and 206A - Time of Concentration

Duration

Participant should take as long as necessary to complete the module. Training time for this module is approximately two hours

Target Audience

All area-level engineers and technicians and others who compute peak discharge from areas greater than 2000 acres and from urban watersheds

Method of Completion

This module is self-study, but the requesting office should select a resource person to answer any questions that the participant’s supervisor is unable to answer

NEDC Contact

Tony Lovell

Technical Coordinator

Quan Quan

Enrollment

Enrollment instructions are provided below.  Be sure to select the appropriate link to ensure successful enrollment. 

USDA Employees

  • Proceed to the Aglearn to login using your USDA eAuthentication ID and password.  This is the same as your WebTCAS ID and password.
  • Select Catalog, Select Natural Resources Conservation Service under Subject Area Menu.
  • Choose the course name by select the button Launch content or Add to Learning Plan to register and complete the course.

District Employees with AgLearn Account

  • Proceed to the Aglearn to login using your USDA eAuthentication ID and password. This is the same logon ID and password used for the TechReg TSP application or profile.
  • Select Catalog, Select Natural Resources Conservation Service under Subject Area Menu.
  • Choose the course name by select the button Launch content or Add to Learning Plan to register and complete the course. 
  • If you do not have an account.  Specific instructions on securing a USDA user account and password are located at getting started.  For further assistance contact the USDA state office in your state for assistance in obtaining an eAuthentication ID and password and AgLearn account.

Technical Service Providers

  • Proceed to the Aglearn to login using your USDA eAuthentication ID and password. This is the same logon ID and password used for the TechReg TSP application or profile.
  • Select Catalog, Select Natural Resources Conservation Service under Subject Area Menu.
  • Choose the course name by select the button Launch content or Add to Learning Plan to register and complete the course.
  • If you are anticipating becoming a Technical Service Provider please review the entire process at TechReg.  Please familiarize yourself with this process if you have not already done so.  Specific instructions on securing a USDA user account and password are located at getting started.

Other USDA Customers

  • For those not in the above categories contact the USDA state office in your state for assistance in obtaining an eAuthentication ID and password and AgLearn account.
  • To obtain this contact information for your state you can go to the Aglearn website click on contact us. Scroll down to NRCS and click on the link that says state contacts.

 

< Back to Hydrology Series