Skip Navigation

Illinois NRCS Engineering Standard Drawings - Livestock Facilities - Grazing

Illinois NRCS Engineering Standard Drawings

4. Livestock Facilities - Grazing

NOTICE—The following standard drawings have been developed to assist in the design of typical NRCS engineering practices in Illinois. Before using any of the standard drawings or details, the designer should verify that the standard applies to the site and that the design limitations are not exceeded. Standard drawings are to be adapted as part of site specific designs that shall be reviewed and approved by qualified individual with appropriate approval authority.

The files listed below are available in following formats:
1. DWG - AutoCAD
drawing.  To save a dwg file, point at the underlined hyperlink, then SHIFT + LEFT CLICK
2. DXF - Drawing Exchange Format generic CAD drawing. 
3. PDF - Adobe Acrobat Reader for viewing and printing only (no editing).
4. XLSB - Excel file

Date IL-ENG-#
Illinois NRCS Engineering Drawing Title AutoCAD
10/14 Spring or Seep Development Livestock Watering Tank 155.dwg 155.dxf 155.pdf  
6/16 Livestock Winter Feeding Station with Walls  In Feeding Area 190.dwg 190.dxf 190.pdf WFS v1.3
6/16 Livestock Winter Feeding Station with Roll Curb Feeding Area 220.dwg 220.dxf 220.pdf WFS v1.3
4/14 Joining Methods Hi-Tensile Wire 800.dwg 800.dxf 800.pdf  
4/14 Deer Management Fence 801.dwg 801.dxf 801.pdf  
4/14 Setting Fence line Post on Uneven Terrain 802.dwg 802.dxf 802.pdf  
7/12  Pull Assembly Single-H 810.dwg 810.dxf 810.pdf  
7/12 Pull Assembly-Diagonal with Deadman 811.dwg 811.dxf 811.pdf  
7/12 Corner Angle Brace Assembly-Diagonal Kiwi 820.dwg 820.dxf 820.pdf  
7/12 Corner Brace Assembly Single H with Deadman 821.dwg 821.dxf 821.pdf  
7/12 Corner Brace Assembly Double H 822.dwg 822.dxf 822.pdf  
7/12 Change of Direction Of Bracing For Fence Changes Of 20 To 60 Degrees 823.dwg 823.dxf 823.pdf  
7/12 End Brace Assembly-Diagonal Kiwi 830.dwg 830.dxf 830.pdf  
4/14 End Brace Assembly-Diagonal (Steel) 831.dwg 831.dxf 831.pdf  
7/12 End Brace Assembly-Double H 832.dwg 832.dxf 832.pdf  
7/12 End Brace Assembly-Deer Management Fence 833.dwg 833.dxf 833.pdf  
4/14 End Brace Assembly 3-Post Diagonal (Steel) 834.dwg 834.dxf 834.pdf  
7/12 End Brace Assembly Single-H With Deadman 835.dwg 835.dxf 835.pdf  
4/14 Water Gap Options 840.dwg 840.dxf 840.pdf  
4/14 Breakway Fence Across Depression 841.dwg 841.dxf 841.pdf  
4/14 Flood Gate-Electric 842.dwg 842.dxf 842.pdf  
4/14 Flood Gate-PVC 843.dwg 843.dxf 843.pdf  
4/14 Swinging Barrel Water Gate 844.dwg 844.dxf 844.pdf  
4/14 Electric Fence Lightning Protection 850.dwg 850.dxf 850.pdf  
4/14 Energizer To Electric Fence Connection & Grounding (Wire Return System) 851.dwg 851.dxf 851.pdf  
4/14 Energizer To Electric Fence Connection & Grounding (Earth Return System) 852.dwg 852.dxf 852.pdf  
4/14 Electrical Connection Through Fence Opening 853.dwg 853.dxf 853.pdf  
7/12 Watering Ramp Fencing-Cattle Panels 860.dwg 860.dxf 860.pdf  
7/12 Watering Ramp Fencing-Wire 861.dwg 861.dxf 861.pdf  
4/14 Streambank Watering Ramp 862.dwg 862.dxf 862.pdf  
4/14 Pond Watering Ramp 863.dwg 863.dxf 863.pdf  
6/16 Stream Crossing For Livestock 864.dwg 864.dxf 864.pdf  
7/16 Gravel Heavy Use Area Protection 870.dwg 870.dxf 870.pdf HUA v1.1
7/16 Concrete Heavy Use Area Protection 871.dwg 871.dxf 871.pdf HUA v1.1
11/15 Gravel Heavy Use Area Tank Pad 872.dwg 872.dxf 872.pdf HUA v1.1
11/15 Concrete/Gravel Heavy Use Area Tank Pad 873.dwg 873.dxf 873.pdf HUA v1.1
4/14 Livestock Trail 874.dwg 874.dxf 874.pdf  
6/16 Insulated Energy Free Automatic Stock Waterers 875.dwg 875.dxf 875.pdf  
9/15 Rubber Tire Stockwater Tank 876.dwg 876.dxf 876.pdf  
1/15 Stockwater Tank Hydrant Details (2 Pages) 877.dwg 877.dxf 877.pdf  
4/12 Quick Coupler Installation Detail 878.dwg 878.dxf 878.pdf  
1/15 Watering Facility Wildlife Escape Ramp 879.dwg 879.dxf 879.pdf  
4/14 Livestock Watering Facility Pond Sump 880.dwg 880.dxf 880.pdf  
9/15 Guard Post For Riser In pasture 881.dwg 881.dxf 881.pdf